 Просмотр сообщений
|
|
Страниц: [1]
|
|
1
|
Главная категория / Nodeny 49 / Re: Очень странное поведение шейпера для серых адресов
|
: 15 Июля 2011, 14:23:17
|
gw# ipfw show
00054 189 218 allow tcp from any to me dst-port 22
00055 19 10 allow tcp from me 22 to any
00100 19521 980180 deny tcp from any to any dst-port 445,135
00110 0 0 allow ip from any to any via lo0
00120 88675 11179064 skipto 1000 ip from me to any
00130 13395 750188 deny icmp from any to any in icmptypes 5,9,13,14,15,16,17
00131 0 0 allow ip from me to table(122)
00132 795 64320 allow ip from table(122) to me
00140 122115 9784670 deny ip from any to table(120)
00150 16876 1331151 deny ip from table(120) to any
00160 123639 14585623 skipto 2000 ip from any to me
00200 531116422 409309576915 skipto 500 ip from any to any via ethout1
00300 247429083 127834443592 skipto 4500 ip from any to any in
00400 283451380 280710589461 skipto 450 ip from any to any recv ethout1
00420 6507 765563 divert 1 ip from any to any
00450 283465825 280713865141 divert 2 ip from any to any
00490 282988919 280149473605 allow ip from any to any
00500 284192790 281614216117 skipto 32500 ip from any to any in
00510 246979675 127726081982 divert 1 ip from any to any
00540 246925905 127689430093 allow ip from any to any
01000 36650 7458771 allow udp from any 53,7723 to any
01010 128 14433 allow tcp from any to any setup keep-state
01020 90780 11589925 allow udp from any to any keep-state
01100 5775 667654 allow ip from any to any
02000 0 0 check-state
02010 2441 488398 allow icmp from any to any
02020 0 0 allow tcp from any to any dst-port 80,443
02050 38083 3019448 deny ip from any to any via ethout1
02060 36763 2387749 allow udp from any to any dst-port 53,7723
02100 1694 138309 deny ip from any to any
05000 7110 1020579 deny ip from not table(0) to any
05001 0 0 skipto 5010 ip from table(127) to table(126)
05002 247338544 127820025839 skipto 5030 ip from any to not table(2)
05003 0 0 deny ip from any to not table(1)
05004 2070 390365 pipe tablearg ip from table(21) to any
05005 0 0 deny ip from any to any
05010 0 0 pipe tablearg ip from table(127) to any
05030 0 0 deny tcp from table(15) to any dst-port 25
05400 247338544 127820025839 pipe tablearg ip from table(11) to any
32000 0 0 deny ip from any to any
32490 3297 247675 deny ip from any to any
33000 0 0 pipe tablearg ip from table(126) to table(127)
33001 284096945 281547556102 skipto 33010 ip from not table(2) to any
33002 0 0 pipe tablearg ip from any to table(20)
33003 0 0 deny ip from any to any
33400 284086146 281546504510 pipe tablearg ip from any to table(10)
65535 19408 1791766 deny ip from any to any
gw# gw# ifconfig
ethin1: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=19b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4>
ether 00:1b:21:96:94:7e
inet 111.111.111.1 netmask 0xffffff00 broadcast 94.25.30.255
inet 10.10.0.1 netmask 0xffff0000 broadcast 10.10.255.255
media: Ethernet autoselect (1000baseTX <full-duplex>)
status: active
ethout1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=389b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_UCAST,WOL_MCAST,WOL_MAGIC>
ether 1c:6f:65:20:5d:7f
inet 222.222.222.166 netmask 0xfffffffc broadcast 92.50.198.167
media: Ethernet autoselect (1000baseTX <full-duplex>)
status: active
sk0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=b<RXCSUM,TXCSUM,VLAN_MTU>
ether 1c:af:f7:0d:dd:23
media: Ethernet autoselect (none)
status: no carrier
pfsync0: flags=0<> metric 0 mtu 1460
syncpeer: 224.0.0.240 maxupd: 128
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5
inet6 ::1 prefixlen 128
inet 127.0.0.1 netmask 0xff000000
pflog0: flags=0<> metric 0 mtu 33204
gw#
gw# pfctl -si
Status: Enabled for 0 days 02:24:59 Debug: Urgent
State Table Total Rate
current entries 449
searches 1424069894 163705.0/s
inserts 98634 11.3/s
removals 98185 11.3/s
Counters
match 1420279449 163269.3/s
bad-offset 0 0.0/s
fragment 240 0.0/s
short 38 0.0/s
normalize 347 0.0/s
memory 0 0.0/s
bad-timestamp 0 0.0/s
congestion 0 0.0/s
ip-option 148 0.0/s
proto-cksum 14813 1.7/s
state-mismatch 50 0.0/s
state-insert 0 0.0/s
state-limit 0 0.0/s
src-limit 0 0.0/s
synproxy 0 0.0/s
gw#
|
|
|
|
|
2
|
Главная категория / Nodeny 49 / Очень странное поведение шейпера для серых адресов
|
: 15 Июля 2011, 13:46:12
|
Доброго всем дня. Столкнулся с очень странной проблемой. Имеется сеть, внутри которой используются серые и белые IP адреса. Выход в инет через NoDeny 49.32 freebsd 7.3. Не используются никакие mpd pptp и прочее. Все настройки нодени стандартные, из мануала. Так вот проблема в том, что если у клиента используется серый ip, то скорость у него почти всегда ниже заявленной. Т.е. если например ему прописано 10мбит/с, скорость прыгает от 4 мбит/с до 7 мбит/с, редко поднимается до заявленной 10мбит. Если ему прописать реальный ип, то скорость стабильно держится 9-10мбит/с. Ширина внешнего канала влиять не может, она достаточная. Конфигурация такая: uname -a
FreeBSD gw.lan 7.3-RELEASE-p4 FreeBSD 7.3-RELEASE-p4
rc.conf ifconfig_em0_name="ethin1"
ifconfig_ethin1="inet 111.111.111.1/24"
ifconfig_ethin1_alias1="inet 10.10.0.1 netmask 255.255.0.0"
ifconfig_re0_name="ethout1"
ifconfig_ethout1="inet 222.222.222.166 netmask 255.255.255.252"
defaultrouter="222.222.222.165"
hostname="gw.lan"
sshd_enable="YES"
firewall_enable="YES"
fsck_y_enable="YES"
background_fsck="NO"
gateway_enable="YES"
mysql_enable="YES"
apache22_enable="YES"
ntpd_enable="YES"
pf_enable="YES"
ipcad_enable="YES"
dnsmasq_enable="YES"
monit_enable="YES"
mysql_dbdir="/usr/db/mysql"
bandwidthd_enable="YES"
fail2ban_enable="YES"
arpwatch_enable="YES"
arpwatch_interfaces="ethin1"
arpwatch_ethin1_options="-m root"
sendmail_enable="NO"
sendmail_submit_enable="NO"
sendmail_outbound_enable="NO"
sendmail_msp_queue_enable="NO"
pf.conf set limit states 128000
set optimization aggressive
scrub in all
nat pass on ethout1 from 10.10.0.0/16 to any -> ethout1
ядро cpu I686_CPU
ident GW
# To statically compile in device wiring instead of /boot/device.hints
#hints "GENERIC.hints" # Default places to look for devices.
makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols
options IPFIREWALL
options IPFIREWALL_VERBOSE
options IPFIREWALL_FORWARD
options DUMMYNET
options IPDIVERT
options NETGRAPH
options NETGRAPH_ETHER
options NETGRAPH_SOCKET
options NETGRAPH_TEE
options SCHED_ULE # ULE scheduler
options PREEMPTION # Enable kernel thread preemption
options INET # InterNETworking
options INET6 # IPv6 communications protocols
options SCTP # Stream Control Transmission Protocol
options FFS # Berkeley Fast Filesystem
options SOFTUPDATES # Enable FFS soft updates support
options UFS_ACL # Support for access control lists
options UFS_DIRHASH # Improve performance on big directories
options UFS_GJOURNAL # Enable gjournal-based UFS journaling
options MD_ROOT # MD is a potential root device
options NFSCLIENT # Network Filesystem Client
options NFSSERVER # Network Filesystem Server
options NFSLOCKD # Network Lock Manager
options NFS_ROOT # NFS usable as /, requires NFSCLIENT
options MSDOSFS # MSDOS Filesystem
options CD9660 # ISO 9660 Filesystem
options PROCFS # Process filesystem (requires PSEUDOFS)
options PSEUDOFS # Pseudo-filesystem framework
options GEOM_PART_GPT # GUID Partition Tables.
options GEOM_LABEL # Provides labelization
options COMPAT_43TTY # BSD 4.3 TTY compat [KEEP THIS!]
options COMPAT_FREEBSD4 # Compatible with FreeBSD4
options COMPAT_FREEBSD5 # Compatible with FreeBSD5
options COMPAT_FREEBSD6 # Compatible with FreeBSD6
options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI
options KTRACE # ktrace(1) support
options STACK # stack(9) support
options SYSVSHM # SYSV-style shared memory
options SYSVMSG # SYSV-style message queues
options SYSVSEM # SYSV-style semaphores
options P1003_1B_SEMAPHORES # POSIX-style semaphores
options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions
options KBD_INSTALL_CDEV # install a CDEV entry in /dev
options ADAPTIVE_GIANT # Giant mutex is adaptive.
options STOP_NMI # Stop CPUS using NMI instead of IPI
options AUDIT # Security event auditing
#options KDTRACE_HOOKS # Kernel DTrace hooks
options INCLUDE_CONFIG_FILE # Include this file in kernel
# To make an SMP kernel, the next two lines are needed
options SMP # Symmetric MultiProcessor Kernel
device apic # I/O APIC
# CPU frequency control
device cpufreq
# Bus support.
device eisa
device pci
# Floppy drives
#device fdc
# ATA and ATAPI devices
device ata
device atadisk # ATA disk drives
device ataraid # ATA RAID drives
device atapicd # ATAPI CDROM drives
device atapifd # ATAPI floppy drives
device atapist # ATAPI tape drives
options ATA_STATIC_ID # Static device numbering
# SCSI Controllers
# atkbdc0 controls both the keyboard and the PS/2 mouse
device atkbdc # AT keyboard controller
device atkbd # AT keyboard
device psm # PS/2 mouse
device kbdmux # keyboard multiplexer
device vga # VGA video card driver
device splash # Splash screen and screen saver support
# syscons is the default console driver, resembling an SCO console
device sc
device agp # support several AGP chipsets
# Power management support (see NOTES for more options)
#device apm
# Add suspend/resume support for the i8254.
device pmtimer
# PCCARD (PCMCIA) support
# PCMCIA and cardbus bridge support
# If you've got a "dumb" serial or parallel PCI card that is
# supported by the puc(4) glue driver, uncomment the following
# line to enable it (connects to sio, uart and/or ppc drivers):
#device puc
# PCI Ethernet NICs.
device de # DEC/Intel DC21x4x (``Tulip'')
device em # Intel PRO/1000 Gigabit Ethernet Family
device igb # Intel PRO/1000 PCIE Server Gigabit Family
device ixgb # Intel PRO/10GbE Ethernet Card
device le # AMD Am7900 LANCE and Am79C9xx PCnet
device txp # 3Com 3cR990 (``Typhoon'')
device vx # 3Com 3c590, 3c595 (``Vortex'')
# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device miibus # MII bus support
device age # Attansic/Atheros L1 Gigabit Ethernet
device alc # Atheros AR8131/AR8132 Ethernet
device ale # Atheros AR8121/AR8113/AR8114 Ethernet
device bce # Broadcom BCM5706/BCM5708 Gigabit Ethernet
device bfe # Broadcom BCM440x 10/100 Ethernet
device bge # Broadcom BCM570xx Gigabit Ethernet
device dc # DEC/Intel 21143 and various workalikes
device et # Agere ET1310 10/100/Gigabit Ethernet
device fxp # Intel EtherExpress PRO/100B (82557, 82558)
device jme # JMicron JMC250 Gigabit/JMC260 Fast Ethernet
device lge # Level 1 LXT1001 gigabit Ethernet
device msk # Marvell/SysKonnect Yukon II Gigabit Ethernet
device nfe # nVidia nForce MCP on-board Ethernet
device nge # NatSemi DP83820 gigabit Ethernet
#device nve # nVidia nForce MCP on-board Ethernet Networking
device pcn # AMD Am79C97x PCI 10/100 (precedence over 'le')
device re # RealTek 8139C+/8169/8169S/8110S
device rl # RealTek 8129/8139
device sf # Adaptec AIC-6915 (``Starfire'')
device sis # Silicon Integrated Systems SiS 900/SiS 7016
device sk # SysKonnect SK-984x & SK-982x gigabit Ethernet
device ste # Sundance ST201 (D-Link DFE-550TX)
device stge # Sundance/Tamarack TC9021 gigabit Ethernet
device ti # Alteon Networks Tigon I/II gigabit Ethernet
device tl # Texas Instruments ThunderLAN
device tx # SMC EtherPower II (83c170 ``EPIC'')
device vge # VIA VT612x gigabit Ethernet
device vr # VIA Rhine, Rhine II
device wb # Winbond W89C840F
device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
# ISA Ethernet NICs. pccard NICs included.
# Pseudo devices.
device loop # Network loopback
device random # Entropy device
device ether # Ethernet support
device vlan # 802.1Q VLAN support
device sl # Kernel SLIP
device ppp # Kernel PPP
device tun # Packet tunnel.
device pty # Pseudo-ttys (telnet etc)
device md # Memory "disks"
device gif # IPv6 and IPv4 tunneling
device faith # IPv6-to-IPv4 relaying (translation)
device firmware # firmware assist module
# The `bpf' device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
# Note that 'bpf' is required for DHCP.
device bpf # Berkeley packet filter
device carp
device pf
device pflog
device pfsync
options ALTQ
options ALTQ_CBQ # Class Bases Queuing (CBQ)
options ALTQ_RED # Random Early Detection (RED)
options ALTQ_RIO # RED In/Out
options ALTQ_HFSC # Hierarchical Packet Scheduler (HFSC)
options ALTQ_PRIQ # Priority Queuing (PRIQ)
options ALTQ_NOPCC # Required for SMP build
ipfw стандартный, из документации по биллингу. Может кто-нибудь сталкивался с похожим? И еще такой момент: если скорость у клиента поставить 5мбит, то реальная скорость будет 2-3мбита, если поставить 7мбит - то реальная 3-5мбит, если 10 - то 4-7мбит. |
|
|
|
|
