Биллинговая система Nodeny

on commit {
set ClientIP = binary-to-ascii(10, 8, ".", leased-address);
set ClientMac = binary-to-ascii(16, 8, ":", substring(hardware, 1, 6));
set SwitchMac = "";
set SwitchPort ="";
if exists agent.circuit-id
{
set SwitchMac = binary-to-ascii(16, 8, ":", suffix(option agent.remote-id, 6));
set SwitchPort = binary-to-ascii(10, 8, ":", suffix(option agent.circuit-id, 1));
}
execute("/usr/bin/perl", "/usr/local/nodeny/modules/dhcp/events.pl", "commit",
ClientIP, ClientMac, SwitchMac, SwitchPort);
}
on expiry {
set ClientIP = binary-to-ascii(10, 8, ".", leased-address);
execute("/usr/bin/perl", "/usr/local/nodeny/modules/dhcp/events.pl", "expiry", ClientIP);
}
on release {
set ClientIP = binary-to-ascii(10, 8, ".", leased-address);
execute("/usr/bin/perl", "/usr/local/nodeny/modules/dhcp/events.pl", "release", ClientIP);
}
}

#-------------------------------------------------------------------

#                       DES-1228/ME Configuration

#

#                       Firmware: Build 1.50.B04

#        Copyright(C) 2009 D-Link Corporation. All rights reserved.

#-------------------------------------------------------------------



# BASIC


config serial_port baud_rate 9600 auto_logout 10_minutes

# ACCOUNT LIST


# ACCOUNT END


# PASSWORD ENCRYPTION

disable password encryption 

config terminal_line default

enable clipaging
disable command logging


# STORM


config traffic trap both

config traffic control  1-28 broadcast disable multicast disable unicast disable action drop threshold 64 countdown 0 time_interval 5


# LOOP_DETECT

enable loopdetect
config loopdetect recover_timer 60
config loopdetect interval 10
config loopdetect port 1-28 state enabled


# QOS


config scheduling_mechanism strict

config scheduling 0 weight 1 

config scheduling 1 weight 2 

config scheduling 2 weight 4 

config scheduling 3 weight 8 

config 802.1p user_priority 0 1

config 802.1p user_priority 1 0

config 802.1p user_priority 2 0

config 802.1p user_priority 3 1

config 802.1p user_priority 4 2

config 802.1p user_priority 5 2

config 802.1p user_priority 6 3

config 802.1p user_priority 7 3

config cos tos value 0 class 0

config cos tos value 1 class 0

config cos tos value 2 class 0

config cos tos value 3 class 0

config cos tos value 4 class 0

config cos tos value 5 class 0

config cos tos value 6 class 0

config cos tos value 7 class 0

config dscp_mapping dscp_value 0 class 0

config dscp_mapping dscp_value 1 class 0

config dscp_mapping dscp_value 2 class 0

config dscp_mapping dscp_value 3 class 0

config dscp_mapping dscp_value 4 class 0

config dscp_mapping dscp_value 5 class 0

config dscp_mapping dscp_value 6 class 0

config dscp_mapping dscp_value 7 class 0

config dscp_mapping dscp_value 8 class 0

config dscp_mapping dscp_value 9 class 0

config dscp_mapping dscp_value 10 class 0

config dscp_mapping dscp_value 11 class 0

config dscp_mapping dscp_value 12 class 0

config dscp_mapping dscp_value 13 class 0

config dscp_mapping dscp_value 14 class 0

config dscp_mapping dscp_value 15 class 0

config dscp_mapping dscp_value 16 class 0

config dscp_mapping dscp_value 17 class 0

config dscp_mapping dscp_value 18 class 0

config dscp_mapping dscp_value 19 class 0

config dscp_mapping dscp_value 20 class 0

config dscp_mapping dscp_value 21 class 0

config dscp_mapping dscp_value 22 class 0

config dscp_mapping dscp_value 23 class 0

config dscp_mapping dscp_value 24 class 0

config dscp_mapping dscp_value 25 class 0

config dscp_mapping dscp_value 26 class 0

config dscp_mapping dscp_value 27 class 0

config dscp_mapping dscp_value 28 class 0

config dscp_mapping dscp_value 29 class 0

config dscp_mapping dscp_value 30 class 0

config dscp_mapping dscp_value 31 class 0

config dscp_mapping dscp_value 32 class 0

config dscp_mapping dscp_value 33 class 0

config dscp_mapping dscp_value 34 class 0

config dscp_mapping dscp_value 35 class 0

config dscp_mapping dscp_value 36 class 0

config dscp_mapping dscp_value 37 class 0

config dscp_mapping dscp_value 38 class 0

config dscp_mapping dscp_value 39 class 0

config dscp_mapping dscp_value 40 class 0

config dscp_mapping dscp_value 41 class 0

config dscp_mapping dscp_value 42 class 0

config dscp_mapping dscp_value 43 class 0

config dscp_mapping dscp_value 44 class 0

config dscp_mapping dscp_value 45 class 0

config dscp_mapping dscp_value 46 class 0

config dscp_mapping dscp_value 47 class 0

config dscp_mapping dscp_value 48 class 0

config dscp_mapping dscp_value 49 class 0

config dscp_mapping dscp_value 50 class 0

config dscp_mapping dscp_value 51 class 0

config dscp_mapping dscp_value 52 class 0

config dscp_mapping dscp_value 53 class 0

config dscp_mapping dscp_value 54 class 0

config dscp_mapping dscp_value 55 class 0

config dscp_mapping dscp_value 56 class 0

config dscp_mapping dscp_value 57 class 0

config dscp_mapping dscp_value 58 class 0

config dscp_mapping dscp_value 59 class 0

config dscp_mapping dscp_value 60 class 0

config dscp_mapping dscp_value 61 class 0

config dscp_mapping dscp_value 62 class 0

config dscp_mapping dscp_value 63 class 0

config 802.1p default_priority 1-28 0

config cos mapping port 1-28  ethernet 802.1p  


# MIRROR


disable mirror

config mirror port 1 delete source ports 1 both


# BANDWIDTH


 config bandwidth_control 1-24 rx_rate no_limit tx_rate no_limit

 config bandwidth_control 25-28 rx_rate 1000000 tx_rate 1000000


# SYSLOG


disable syslog

config log_save_timing on_demand


# TRAF-SEGMENTATION


config traffic_segmentation 1-28 forward_list 1-28


# PACKET_FROM_CPU


config mgmt_pkt_priority default


# PORT


 config ports 1  speed auto flow_control disable state enable  description "34"

 config ports 1-28  learning enable

 config ports 1-28  mdix auto

 config ports 2-28  speed auto flow_control disable state enable  clear_description

 config ports 25-26 medium_type fiber speed auto flow_control disable state enable  clear_description

 config ports 25-26 medium_type fiber learning enable


# OAM



# MANAGEMENT


enable snmp traps 

enable snmp authenticate traps 

enable snmp linkchange_traps

config snmp linkchange_traps ports all enable
config snmp coldstart_traps enable
config snmp warmstart_traps enable

disable rmon 


# SNMPv3


delete snmp community public

delete snmp community private

delete snmp user initial

delete snmp group initial

delete snmp view restricted all

delete snmp view CommunityView all

delete snmp group public

delete snmp group private

delete snmp group ReadGroup

delete snmp group WriteGroup

config snmp engineID 800000ab031cbdb983d5ea

create snmp view restricted 1.3.6.1.2.1.1 view_type included

create snmp view restricted 1.3.6.1.2.1.11 view_type included

create snmp view restricted 1.3.6.1.6.3.10.2.1 view_type included

create snmp view restricted 1.3.6.1.6.3.11.2.1 view_type included

create snmp view restricted 1.3.6.1.6.3.15.1.1 view_type included

create snmp view CommunityView 1 view_type included

create snmp view CommunityView 1.3.6.1.6.3 view_type excluded

create snmp view CommunityView 1.3.6.1.6.3.1 view_type included

create snmp group public v2c read_view CommunityView notify_view CommunityView 

create snmp group initial v3  noauth_nopriv read_view restricted notify_view restricted 

create snmp group private v2c read_view CommunityView write_view CommunityView notify_view CommunityView 

create snmp group ReadGroup v1 read_view CommunityView notify_view CommunityView 

create snmp group ReadGroup v2c read_view CommunityView notify_view CommunityView 

create snmp group WriteGroup v1 read_view CommunityView write_view CommunityView notify_view CommunityView 

create snmp group WriteGroup v2c read_view CommunityView write_view CommunityView notify_view CommunityView 

create snmp user initial initial 


# VLAN


disable asymmetric_vlan

config vlan default delete 1-28

config vlan default advertisement enable

create vlan admin tag 100 advertisement

config vlan admin add tagged 25-28

create vlan abon tag 217 advertisement

config vlan abon add tagged 25-28

config vlan abon add untagged 1-24

disable gvrp

config gvrp 1-24 state disable ingress_checking enable acceptable_frame admit_all pvid 217

config gvrp 25-28 state disable ingress_checking enable acceptable_frame admit_all pvid 1


# 8021X


disable 802.1x

config 802.1x auth_protocol radius_eap

config radius parameter timeout 5 retransmit 2

config 802.1x capability ports 1-28 none

config 802.1x auth_parameter ports 1-28 direction both port_control auto quiet_period 60 tx_period 30 supp_timeout 30 server_timeout 30 max_req 2 reauth_period 3600 enable_reauth disable


# PORT_LOCK


disable port_security trap_log

config port_security ports 1-28 admin_state disable max_learning_addr 1 lock_address_mode DeleteOnTimeout


# PPPOE

config pppoe circuit_id_insertion state disable
config pppoe circuit_id_insertion ports 1-28 state enable circuit_id ip


# DhcpSS

config filter dhcp_server ports 1-28 state disable
config filter dhcp_server trap_log disable
config filter dhcp_server illegal_server_log_suppress_duration 5min


# FDB


config fdb aging_time 300

config multicast port_filtering_mode all filter_unregistered_groups

config multicast port_filtering_mode 1-28 forward_unregistered_groups

disable flood_fdb

config flood_fdb log disable trap disable


# MAC_ADDRESS_TABLE_NOTIFICATION


config mac_notification interval 1 historysize 1

disable mac_notification

config mac_notification ports 1-28 disable


# STP


config stp version rstp

config stp maxage 20 maxhops 20 forwarddelay 15 txholdcount 6 fbpdu enable hellotime 2 lbd enable lbd_recover_timer 60

config stp priority 32768 instance_id 0 

config stp mst_config_id name 1C:BD:B9:83:D5:EA revision_level 0

config stp trap new_root enable topo_change enable 

config stp ports 1-28 externalCost auto edge false p2p auto state enable lbd disable

config stp mst_ports 1-28 instance_id 0 internalCost auto priority 128

config stp ports 1-28 fbpdu enable
config stp ports 1-28 restricted_role false
config stp ports 1-28 restricted_tcn false

disable stp


# MULTI FILTER


config max_mcast_group port 1-28 max_group 64


# SAFEGUARD_ENGINE


config safeguard_engine state enable utilization rising 30 falling 20 trap_log disable mode fuzzy


# BANNER_PROMP


config command_prompt default

config greeting_message default


# SSH


config ssh algorithm 3DES enable

config ssh algorithm AES128 enable

config ssh algorithm AES192 enable

config ssh algorithm AES256 enable

config ssh algorithm arcfour enable

config ssh algorithm blowfish enable

config ssh algorithm cast128 enable

config ssh algorithm twofish128 enable

config ssh algorithm twofish192 enable

config ssh algorithm twofish256 enable

config ssh algorithm MD5 enable

config ssh algorithm SHA1 enable

config ssh algorithm RSA enable

config ssh algorithm DSA enable

config ssh authmode password enable

config ssh authmode publickey enable

config ssh authmode hostbased enable

config ssh server maxsession 8

config ssh server contimeout 120

config ssh server authfail 2

config ssh server rekey never

disable ssh


# SNOOP


disable igmp_snooping

config igmp_snooping data_driven_learning max_learned_entry 56

config igmp_snooping vlan_name default host_timeout 260 router_timeout 260 leave_timer 2 state disable fast_leave disable 

config igmp_snooping data_driven_learning vlan_name default aged_out disable 

config igmp_snooping querier all query_interval 125 max_response_time 10 robustness_variable 2 last_member_query_interval 1 state disable

config igmp_snooping vlan_name admin host_timeout 260 router_timeout 260 leave_timer 2 state disable fast_leave disable

config igmp_snooping data_driven_learning vlan_name admin aged_out disable 

config igmp_snooping vlan_name abon host_timeout 260 router_timeout 260 leave_timer 2 state disable fast_leave disable

config igmp_snooping data_driven_learning vlan_name abon aged_out disable 

config igmp access_authentication port 1-28 state disable

config cpu_filter l3_control_pkt 1-28 all state disable


# VLAN_TRUNK


disable vlan_trunk

config vlan_trunk ports 25-28 state enable


# SMTP


disable smtp


# ACL


create access_profile  ip  udp src_port 0xFFFF    profile_id 1

config access_profile profile_id 1  add access_id 1  ip  udp src_port 67        port 24 permit

config access_profile profile_id 1  add access_id 2  ip  udp src_port 67        port 25 permit

config access_profile profile_id 1  add access_id 3  ip  udp src_port 67        port 1 deny

config access_profile profile_id 1  add access_id 4  ip  udp src_port 67        port 3 deny

config access_profile profile_id 1  add access_id 5  ip  udp src_port 67        port 2 deny

config access_profile profile_id 1  add access_id 6  ip  udp src_port 67        port 4 deny

config access_profile profile_id 1  add access_id 7  ip  udp src_port 67        port 5 deny

config access_profile profile_id 1  add access_id 8  ip  udp src_port 67        port 7 deny

config access_profile profile_id 1  add access_id 9  ip  udp src_port 67        port 6 deny

config access_profile profile_id 1  add access_id 10  ip  udp src_port 67        port 8 deny

config access_profile profile_id 1  add access_id 11  ip  udp src_port 67        port 10 deny

config access_profile profile_id 1  add access_id 12  ip  udp src_port 67        port 11 deny

enable cpu_interface_filtering


# SNTP


disable sntp

config time_zone operator - hour 6 min 0

config sntp primary 0.0.0.0 secondary 0.0.0.0 poll-interval 720

config dst disable


# LACP


config lacp_port 1-28 mode passive

config link_aggregation algorithm mac_source


# ADDRBIND


disable address_binding trap_log

config address_binding ip_mac ports 1-28 state disable allow_zeroip disable


# ARPSPOOF



# IP


config ipif System vlan admin ipaddress 10.0.0.38/24 state enable

config ipif System dhcp_option12 state disable

enable telnet 23

enable web 80

disable autoconfig


# LLDP


disable lldp

config lldp message_tx_interval 30

config lldp tx_delay 2

config lldp message_tx_hold_multiplier 4

config lldp reinit_delay 2

config lldp notification_interval 5

config lldp ports 1-28 notification disable

config lldp ports 1-28 admin_status tx_and_rx


# ARP


config arp_aging time 20

config gratuitous_arp send ipif_status_up enable

config gratuitous_arp send dup_ip_detected enable

config gratuitous_arp learning enable


# AAA


config authen_login default method local

config authen_enable default method  local_enable

config authen application console login default

config authen application console enable default

config authen application telnet login default

config authen application telnet enable default

config authen application ssh login default

config authen application ssh enable default

config authen application http login default

config authen application http enable default

config authen parameter response_timeout 30

config authen parameter attempt 3

disable authen_policy

config admin local_enable





# DHCP_RELAY

disable dhcp_relay
config dhcp_relay hops 4 time 0 
config dhcp_relay option_82 state disable
config dhcp_relay option_82 check disable
config dhcp_relay option_82 policy replace
config dhcp_relay option_82 remote_id default


# DHCP_LOCAL_RELAY

enable dhcp_local_relay
config dhcp_local_relay option_82 remote_id default
config dhcp_local_relay vlan vlanid 217 state enable 


# FIRM


config configuration trap save disable upload disable download disable 


# ROUTE


create iproute default 10.0.0.167 1


#-------------------------------------------------------------------

#             End of configuration file for DES-1228/ME

#------------------------------------------------------------------- 

enable dhcp_local_relay
config dhcp_local_relay vlan vlanid ...... state enable
config dhcp_local_relay option_82 ports 1-24 policy replace
config dhcp_relay option_82 state enable
config dhcp_relay option_82 check enable
config dhcp_relay option_82 policy replace