Биллинговая система Nodeny

startup:
    # Users Allowed to connect
    set user zentavr zxcvbn admin
    # Console
    set console self 127.0.0.1 5005
    set console open
    # Web
    set web self 0.0.0.0 5006
    set web open

default:
    load main_conf

main_conf:
    create bundle template B
    #set bundle enable compression
    set bundle disable compression
    set bundle enable encryption
    set iface idle 0
    set iface disable on-demand
    set iface mtu 1480
    # Enabling MTU Fragmentation with MPD daemon
    set iface enable tcpmssfix
    # Header Compression
    set ipcp yes vjcomp
    # IP Ranges (когда юзается радиус, это до жопы - ИП берётся с Радиуса)
    set ipcp ranges 10.126.20.129/32 10.126.20.128/25
    # DNS
    set ipcp dns 10.126.20.10
    # Compression
    #set ccp enable mppc
    #set mppc enable e128
    #set mppc enable stateless
    # Encryption
    set ecp disable dese-bis dese-old
    # Logging
    log -echo -ipv6cp +radius -rep
    load common

common:
    create link template PPPoE pppoe
    set link enable no-orig-auth
    set link max-children 1000
    set auth max-logins 1
    load pppoe

pppoe:
    # Using template setting B
    set link action bundle B
    set link disable multilink
    set link enable acfcomp protocomp
    set link disable pap chap chap-msv1 chap-md5
    set link enable chap-msv2
    set link keep-alive 10 60
    # Service Name: Accept All Services
    set pppoe service "*"
    # Access Concentrator, send to clients
    set pppoe acname "gw3 network AC"
    # Radius Auth
    load radius
    #
    # Interfaces
    #
    # em0
    create link template em0 PPPoE
    set pppoe iface em0
    set link enable incoming
    # em1
    create link template em1 PPPoE
    set pppoe iface em1
    set link enable incoming
    # em2
    create link template em2 PPPoE
    set pppoe iface em2
    set link enable incoming
    # em3
    #create link template em3 PPPoE
    #set pppoe iface em3
    #set link enable incoming
    # em4
    create link template em4 PPPoE
    set pppoe iface em4
    set link enable incoming
    # vlan24
    create link template vlan24 PPPoE
    set pppoe iface vlan24
    set link enable incoming
    # vlan25
    create link template vlan25 PPPoE
    set pppoe iface vlan25
    set link enable incoming
    # vlan26
    create link template vlan26 PPPoE
    set pppoe iface vlan26
    set link enable incoming
    # vlan28
    create link template vlan28 PPPoE
    set pppoe iface vlan28
    set link enable incoming
    # vlan29
    create link template vlan29 PPPoE
    set pppoe iface vlan29
    set link enable incoming
    # vlan73
    create link template vlan73 PPPoE
    set pppoe iface vlan73
    set link enable incoming
    # vlan75
    create link template vlan75 PPPoE
    set pppoe iface vlan75
    set link enable incoming

radius:
    set radius server 10.126.20.100 iammpd
    set radius timeout 5
    set radius retries 2
    set radius me 10.126.20.98
    set radius identifier gw.network.local
    set radius enable message-authentic
    set auth enable radius-auth
    set auth enable radius-acct
    set auth acct-update 45