Пытаюсь поднять mpd5+radius (результат - ошибка 691)
Устанавливал все по докам.
при проверке работоспособности радиуса (radtest test 123456 127.0.0.1 0 hardpass5)
все проходит отлично, как только меняю строчки
authorize_check_query = "SELECT NULL, 'test', 'Password', '123456', '=='"
на
authorize_check_query = "call radcheck('%{SQL-User-Name}')"
authorize_reply_query = "call radreply('%{SQL-User-Name}')"
accounting_update_query = "call radupdate('%{SQL-User-Name}')"
accounting_stop_query = "call radstop('%{SQL-User-Name}')"в файле sql.conf (предварительно создав процедуры в базе по документации),
проверка на работоспособность с реальными клиентами не проходит
запустил радиус для проверки с выводом в консоль
вот че пишет:
подскажите что делаю не так ?...
gw2# /usr/local/sbin/radiusd -X
Starting - reading configuration files ...
reread_config: reading radiusd.conf
Config: including file: /usr/local/etc/raddb/proxy.conf
Config: including file: /usr/local/etc/raddb/clients.conf
Config: including file: /usr/local/etc/raddb/snmp.conf
Config: including file: /usr/local/etc/raddb/eap.conf
Config: including file: /usr/local/etc/raddb/sql.conf
main: prefix = "/usr/local"
main: localstatedir = "/var"
main: logdir = "/var/log"
main: libdir = "/usr/local/lib"
main: radacctdir = "/var/log/radacct"
main: hostname_lookups = no
main: max_request_time = 30
main: cleanup_delay = 5
main: max_requests = 1024
main: delete_blocked_requests = 0
main: port = 0
main: allow_core_dumps = no
main: log_stripped_names = no
main: log_file = "/var/log/radius.log"
main: log_auth = no
main: log_auth_badpass = no
main: log_auth_goodpass = no
main: pidfile = "/var/run/radiusd/radiusd.pid"
main: user = "(null)"
main: group = "(null)"
main: usercollide = no
main: lower_user = "no"
main: lower_pass = "no"
main: nospace_user = "no"
main: nospace_pass = "no"
main: checkrad = "/usr/local/sbin/checkrad"
main: proxy_requests = yes
proxy: retry_delay = 5
proxy: retry_count = 3
proxy: synchronous = no
proxy: default_fallback = yes
proxy: dead_time = 120
proxy: post_proxy_authorize = no
proxy: wake_all_if_all_dead = no
security: max_attributes = 200
security: reject_delay = 1
security: status_server = no
main: debug_level = 0
read_config_files: reading dictionary
read_config_files: reading naslist
Using deprecated naslist file. Support for this will go away soon.
read_config_files: reading clients
read_config_files: reading realms
radiusd: entering modules setup
Module: Library search path is /usr/local/lib
Module: Loaded exec
exec: wait = yes
exec: program = "(null)"
exec: input_pairs = "request"
exec: output_pairs = "(null)"
exec: packet_type = "(null)"
rlm_exec: Wait=yes but no output defined. Did you mean output=none?
Module: Instantiated exec (exec)
Module: Loaded expr
Module: Instantiated expr (expr)
Module: Loaded PAP
pap: encryption_scheme = "crypt"
pap: auto_header = yes
Module: Instantiated pap (pap)
Module: Loaded CHAP
Module: Instantiated chap (chap)
Module: Loaded MS-CHAP
mschap: use_mppe = yes
mschap: require_encryption = no
mschap: require_strong = no
mschap: with_ntdomain_hack = no
mschap: passwd = "(null)"
mschap: ntlm_auth = "(null)"
Module: Instantiated mschap (mschap)
Module: Loaded System
unix: cache = no
unix: passwd = "(null)"
unix: shadow = "(null)"
unix: group = "(null)"
unix: radwtmp = "/var/log/radwtmp"
unix: usegroup = no
unix: cache_reload = 600
Module: Instantiated unix (unix)
Module: Loaded eap
eap: default_eap_type = "md5"
eap: timer_expire = 60
eap: ignore_unknown_eap_types = no
eap: cisco_accounting_username_bug = no
rlm_eap: Loaded and initialized type md5
rlm_eap: Loaded and initialized type leap
gtc: challenge = "Password: "
gtc: auth_type = "PAP"
rlm_eap: Loaded and initialized type gtc
mschapv2: with_ntdomain_hack = no
rlm_eap: Loaded and initialized type mschapv2
Module: Instantiated eap (eap)
Module: Loaded preprocess
preprocess: huntgroups = "/usr/local/etc/raddb/huntgroups"
preprocess: hints = "/usr/local/etc/raddb/hints"
preprocess: with_ascend_hack = no
preprocess: ascend_channels_per_line = 23
preprocess: with_ntdomain_hack = no
preprocess: with_specialix_jetstream_hack = no
preprocess: with_cisco_vsa_hack = no
preprocess: with_alvarion_vsa_hack = no
Module: Instantiated preprocess (preprocess)
Module: Loaded realm
realm: format = "suffix"
realm: delimiter = "@"
realm: ignore_default = no
realm: ignore_null = no
Module: Instantiated realm (suffix)
Module: Loaded files
files: usersfile = "/usr/local/etc/raddb/users"
files: acctusersfile = "/usr/local/etc/raddb/acct_users"
files: preproxy_usersfile = "/usr/local/etc/raddb/preproxy_users"
files: compat = "no"
Module: Instantiated files (files)
Module: Loaded SQL
sql: driver = "rlm_sql_mysql"
sql: server = "localhost"
sql: port = ""
sql: login = "bill_kernel"
sql: password = "hardpass4"
sql: radius_db = "bill"
sql: nas_table = "nas"
sql: sqltrace = no
sql: sqltracefile = "/var/log/sqltrace.sql"
sql: readclients = no
sql: deletestalesessions = yes
sql: num_sql_socks = 5
sql: sql_user_name = "%{User-Name}"
sql: default_user_profile = ""
sql: query_on_not_found = no
sql: authorize_check_query = "call radcheck('%{SQL-User-Name}')"
sql: authorize_reply_query = "call radreply('%{SQL-User-Name}')"
sql: authorize_group_check_query = ""
sql: authorize_group_reply_query = ""
sql: accounting_onoff_query = ""
sql: accounting_update_query = "call radupdate('%{SQL-User-Name}')"
sql: accounting_update_query_alt = ""
sql: accounting_start_query = ""
sql: accounting_start_query_alt = ""
sql: accounting_stop_query = "call radstop('%{SQL-User-Name}')"
sql: accounting_stop_query_alt = ""
sql: group_membership_query = ""
sql: connect_failure_retry_delay = 60
sql: simul_count_query = ""
sql: simul_verify_query = ""
sql: postauth_query = ""
sql: safe-characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"
rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked
rlm_sql (sql): Attempting to connect to bill_kernel@localhost:/bill
rlm_sql (sql): starting 0
rlm_sql (sql): Attempting to connect rlm_sql_mysql #0
rlm_sql_mysql: Starting connect to MySQL server for #0
rlm_sql (sql): Connected new DB handle, #0
rlm_sql (sql): starting 1
rlm_sql (sql): Attempting to connect rlm_sql_mysql #1
rlm_sql_mysql: Starting connect to MySQL server for #1
rlm_sql (sql): Connected new DB handle, #1
rlm_sql (sql): starting 2
rlm_sql (sql): Attempting to connect rlm_sql_mysql #2
rlm_sql_mysql: Starting connect to MySQL server for #2
rlm_sql (sql): Connected new DB handle, #2
rlm_sql (sql): starting 3
rlm_sql (sql): Attempting to connect rlm_sql_mysql #3
rlm_sql_mysql: Starting connect to MySQL server for #3
rlm_sql (sql): Connected new DB handle, #3
rlm_sql (sql): starting 4
rlm_sql (sql): Attempting to connect rlm_sql_mysql #4
rlm_sql_mysql: Starting connect to MySQL server for #4
rlm_sql (sql): Connected new DB handle, #4
Module: Instantiated sql (sql)
Module: Loaded Acct-Unique-Session-Id
acct_unique: key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port"
Module: Instantiated acct_unique (acct_unique)
Module: Loaded detail
detail: detailfile = "/var/log/radacct/%{Client-IP-Address}/detail-%Y%m%d"
detail: detailperm = 384
detail: dirperm = 493
detail: locking = no
Module: Instantiated detail (detail)
Module: Loaded radutmp
radutmp: filename = "/var/log/radutmp"
radutmp: username = "%{User-Name}"
radutmp: case_sensitive = yes
radutmp: check_with_nas = yes
radutmp: perm = 384
radutmp: callerid = yes
Module: Instantiated radutmp (radutmp)
Listening on authentication *:1812
Listening on accounting *:1813
Ready to process requests.
rad_recv: Access-Request packet from host 127.0.0.1:63509, id=145, length=60
User-Name = "notebook"
User-Password = "ljcneg"
NAS-IP-Address = 255.255.255.255
NAS-Port = 0
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 0
modcall[authorize]: module "preprocess" returns ok for request 0
modcall[authorize]: module "chap" returns noop for request 0
modcall[authorize]: module "mschap" returns noop for request 0
rlm_realm: No '@' in User-Name = "notebook", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 0
rlm_eap: No EAP-Message, not doing EAP
modcall[authorize]: module "eap" returns noop for request 0
modcall[authorize]: module "files" returns notfound for request 0
radius_xlat: 'notebook'
rlm_sql (sql): sql_set_user escaped user --> 'notebook'
radius_xlat: 'call radcheck('notebook')'
rlm_sql (sql): Reserving sql socket id: 4
rlm_sql_mysql: MYSQL check_error: 1305 received
rlm_sql_getvpdata: database query error
rlm_sql (sql): SQL query error; rejecting user
rlm_sql (sql): Released sql socket id: 4
modcall[authorize]: module "sql" returns fail for request 0
modcall: leaving group authorize (returns fail) for request 0
Finished request 0
Going to the next request
--- Walking the entire request list ---
Waking up in 6 seconds...
rad_recv: Access-Request packet from host 127.0.0.1:63509, id=145, length=60
Discarding duplicate request from client NoDenyDB:63509 - ID: 145
--- Walking the entire request list ---
Waking up in 3 seconds...
--- Walking the entire request list ---
Cleaning up request 0 ID 145 with timestamp 4b926fd6
Nothing to do. Sleeping until we see a request.
rad_recv: Access-Request packet from host 127.0.0.1:63509, id=145, length=60
User-Name = "notebook"
User-Password = "ljcneg"
NAS-IP-Address = 255.255.255.255
NAS-Port = 0
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 1
modcall[authorize]: module "preprocess" returns ok for request 1
modcall[authorize]: module "chap" returns noop for request 1
modcall[authorize]: module "mschap" returns noop for request 1
rlm_realm: No '@' in User-Name = "notebook", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 1
rlm_eap: No EAP-Message, not doing EAP
modcall[authorize]: module "eap" returns noop for request 1
modcall[authorize]: module "files" returns notfound for request 1
radius_xlat: 'notebook'
rlm_sql (sql): sql_set_user escaped user --> 'notebook'
radius_xlat: 'call radcheck('notebook')'
rlm_sql (sql): Reserving sql socket id: 3
rlm_sql_mysql: MYSQL check_error: 1305 received
rlm_sql_getvpdata: database query error
rlm_sql (sql): SQL query error; rejecting user
rlm_sql (sql): Released sql socket id: 3
modcall[authorize]: module "sql" returns fail for request 1
modcall: leaving group authorize (returns fail) for request 1
Finished request 1
Going to the next request
--- Walking the entire request list ---
Waking up in 6 seconds...
rad_recv: Access-Request packet from host 127.0.0.1:63509, id=145, length=60
Discarding duplicate request from client NoDenyDB:63509 - ID: 145
--- Walking the entire request list ---
Waking up in 3 seconds...
--- Walking the entire request list ---
Cleaning up request 1 ID 145 with timestamp 4b926fdc
Nothing to do. Sleeping until we see a request.
rad_recv: Access-Request packet from host 127.0.0.1:63509, id=145, length=60
User-Name = "notebook"
User-Password = "ljcneg"
NAS-IP-Address = 255.255.255.255
NAS-Port = 0
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 2
modcall[authorize]: module "preprocess" returns ok for request 2
modcall[authorize]: module "chap" returns noop for request 2
modcall[authorize]: module "mschap" returns noop for request 2
rlm_realm: No '@' in User-Name = "notebook", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 2
rlm_eap: No EAP-Message, not doing EAP
modcall[authorize]: module "eap" returns noop for request 2
modcall[authorize]: module "files" returns notfound for request 2
radius_xlat: 'notebook'
rlm_sql (sql): sql_set_user escaped user --> 'notebook'
radius_xlat: 'call radcheck('notebook')'
rlm_sql (sql): Reserving sql socket id: 2
rlm_sql_mysql: MYSQL check_error: 1305 received
rlm_sql_getvpdata: database query error
rlm_sql (sql): SQL query error; rejecting user
rlm_sql (sql): Released sql socket id: 2
modcall[authorize]: module "sql" returns fail for request 2
modcall: leaving group authorize (returns fail) for request 2
Finished request 2
Going to the next request
--- Walking the entire request list ---
Waking up in 6 seconds...
rad_recv: Access-Request packet from host 127.0.0.1:63509, id=145, length=60
Discarding duplicate request from client NoDenyDB:63509 - ID: 145
--- Walking the entire request list ---
Waking up in 3 seconds...
--- Walking the entire request list ---
Cleaning up request 2 ID 145 with timestamp 4b926fe2
Nothing to do. Sleeping until we see a request.
rad_recv: Access-Request packet from host 127.0.0.1:63509, id=145, length=60
User-Name = "notebook"
User-Password = "ljcneg"
NAS-IP-Address = 255.255.255.255
NAS-Port = 0
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 3
modcall[authorize]: module "preprocess" returns ok for request 3
modcall[authorize]: module "chap" returns noop for request 3
modcall[authorize]: module "mschap" returns noop for request 3
rlm_realm: No '@' in User-Name = "notebook", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 3
rlm_eap: No EAP-Message, not doing EAP
modcall[authorize]: module "eap" returns noop for request 3
modcall[authorize]: module "files" returns notfound for request 3
radius_xlat: 'notebook'
rlm_sql (sql): sql_set_user escaped user --> 'notebook'
radius_xlat: 'call radcheck('notebook')'
rlm_sql (sql): Reserving sql socket id: 1
rlm_sql_mysql: MYSQL check_error: 1305 received
rlm_sql_getvpdata: database query error
rlm_sql (sql): SQL query error; rejecting user
rlm_sql (sql): Released sql socket id: 1
modcall[authorize]: module "sql" returns fail for request 3
modcall: leaving group authorize (returns fail) for request 3
Finished request 3
Going to the next request
--- Walking the entire request list ---
Waking up in 6 seconds...
rad_recv: Access-Request packet from host 127.0.0.1:63509, id=145, length=60
Discarding duplicate request from client NoDenyDB:63509 - ID: 145
--- Walking the entire request list ---
Waking up in 3 seconds...
--- Walking the entire request list ---
Cleaning up request 3 ID 145 with timestamp 4b926fe8
Nothing to do. Sleeping until we see a request.
rad_recv: Access-Request packet from host 127.0.0.1:63509, id=145, length=60
User-Name = "notebook"
User-Password = "ljcneg"
NAS-IP-Address = 255.255.255.255
NAS-Port = 0
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 4
modcall[authorize]: module "preprocess" returns ok for request 4
modcall[authorize]: module "chap" returns noop for request 4
modcall[authorize]: module "mschap" returns noop for request 4
rlm_realm: No '@' in User-Name = "notebook", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 4
rlm_eap: No EAP-Message, not doing EAP
modcall[authorize]: module "eap" returns noop for request 4
modcall[authorize]: module "files" returns notfound for request 4
radius_xlat: 'notebook'
rlm_sql (sql): sql_set_user escaped user --> 'notebook'
radius_xlat: 'call radcheck('notebook')'
rlm_sql (sql): Reserving sql socket id: 0
rlm_sql_mysql: MYSQL check_error: 1305 received
rlm_sql_getvpdata: database query error
rlm_sql (sql): SQL query error; rejecting user
rlm_sql (sql): Released sql socket id: 0
modcall[authorize]: module "sql" returns fail for request 4
modcall: leaving group authorize (returns fail) for request 4
Finished request 4
Going to the next request
--- Walking the entire request list ---
Waking up in 6 seconds...
rad_recv: Access-Request packet from host 127.0.0.1:63509, id=145, length=60
Discarding duplicate request from client NoDenyDB:63509 - ID: 145
--- Walking the entire request list ---
Waking up in 3 seconds...
--- Walking the entire request list ---
Cleaning up request 4 ID 145 with timestamp 4b926fee
Nothing to do. Sleeping until we see a request.
